CIP Bearings are resin bonded fabric with internal lubrication. Suited for high loads, low speed applications. Can run against hard or soft mating surfaces. Homogeneous material throughout bearing. Easily machined.

Rulon Bearings are suited for low load, average speed applications.
Does not require lubrication.
Chemically inert.
Filled PTFE

CJ Bearings & Thrust Washers are long wearing, maintenance-free bearing suitable for high load/low speed applications.
Low coefficient of friction.
Chemical resistant.

FCJ Bearings are suited for combination motion-oscillatory, linear, and/or rotary applications.
Bearings can run against hard or soft shafting.
Excellent general purpose bearing.

Standard Bronze Bearings (SAE 660), Fabricated Plane Bearings, are suited for high load applications.
Must be lubricated.
83% Copper, 7% Tin, 7% Lead, 3% Zinc
Tensile Strength (psi) 44,000

Machined to customer's print/specs.

Bonded Construction Bearings enable greater operating PV, improve heat dissipation & load capacity. Broad flexibility in size, geometry and location of wear surfaces. Can be used for diameters, flat or spherical surfaces. Provides a bearing surface in otherwise inaccessible areas. Increases dimensional accuracy.

Self-Lube Bearings are C86300 bronze alloy with solid lubricant plugs.

Self-Lube Clamp Pivot Bearings
Self Lube Thrust Bearing
Cylinder Clevis Dry Bearing

Friction Rollers feature a 3-piece design that eliminates the roller riding directly on the shaft, allowing the use of soft shafting - positioned by pinning the flange and collar to the shaft, thereby providing greater driving force.
3-piece rollers are specifically recommended for inclined sections and areas where pallet acceleration from stops is critical.